S2MPS15A0 Power Charging iC Original New iC For Samsung N920F G925F G925i G920F G920i N920X G928F G928C N920C N9208 G928I G928G

S2MPS15A0 Power Charging iC Original New iC For Samsung N920F G925F G925i G920F G920i N920X G928F G928C N920C N9208 G928I G928G
Samsung N920F Not charging solution iC chip, Dead solution iC S2MPS15A0
Samsung G925F Not charging solution iC chip, Dead solution iC S2MPS15A0
Samsung G925i Not charging solution iC chip, Dead solution iC S2MPS15A0
Samsung G920F Not charging solution iC chip, Dead solution iC S2MPS15A0
Samsung G920i Not charging solution iC chip, Dead solution iC S2MPS15A0
Samsung N920X Not charging solution iC chip, Dead solution iC S2MPS15A0
Samsung G928F Not charging solution iC chip, Dead solution iC S2MPS15A0
Samsung G928C Not charging solution iC chip, Dead solution iC S2MPS15A0
Samsung N920C Not charging solution iC chip, Dead solution iC S2MPS15A0
Samsung N9208 Not charging solution iC chip, Dead solution iC S2MPS15A0
Samsung G928I Not charging solution iC chip, Dead solution iC S2MPS15A0
Samsung G928G Not charging solution iC chip, Dead solution iC S2MPS15A0

Replace or repairing procedure of S2MPS15A0 Power Charging iC
Here is a full procedure to replace or repair in easy and best way.

1. Diagnose carefully that your faulty mobile actually in iC fault.

2. And there is no other solution, only replacement of iC chip is a solution.

3. Cover the whole mother board with high intensity heat insulation tape. Grip the board in board catcher normal tight.

4. Apply good quality flux paste on iC chip you want to remove.

5. Apply heat with heat gun or heat station. Do not exceed the heat above 350 degree centigrade.

6. Remove the iC chip when it starting move or slip from its original place.

7. Clean the mother board iC pad with soldering wiCk and with soldering flux.

8. Apply little flux on mother board iC pad.

9. Put original iC bought from DHiCs.PK

10. Apply heat 300 to 350 degree centigrade according to your heat station brand.

11. Heating time one minute to one minute 30 second.

12. After the iC chip is pasted, net cool the mother board about 3 to 5 minutes.

13. Now everything is done. You can fix the mother board and turn on mobile.