iPhone XS XR MAX power amplifier IC 203-15

Name: iPhone XS XR MAX power amplifier IC 203-15 - DHiCs
SKU: ip93
Price: 600 PKR
Availability: InStock

SKU: ip93

In Stock

₨ 600

In Stock

Add to Wishlist

SKU: ip93 Categories: iCs iPhone, iPX Series Tags: iPhone Power ic 203-15 available in Pakistan, iPhone Power ic 203-15 price in Pakistan, iPhone xr max Power ic 203-15, iPhone xr max Power ic 203-15 price in Pakistan, iPhone xs max Power ic 203-15, iPhone xs max Power ic 203-15 price in Pakistan

iPhone XS XR MAX power amplifier IC 203-15

How to replace iphone iC chips?

*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “iPhone XS XR MAX power amplifier IC 203-15”

Related products

Add to Wishlist

iPhone 6 6+ U1401 SN2400B0

₨ 400 Add to cart

iPhone 6 6+ U1401 SN2400B0 Charging iCHow to replace iphone iC chips?*Remove the chip cleanly, with hot air. *Clean the tracks with a soldering iron, tin and flux. *Clean the map. *Inspect the card under the microscope. *If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection. *Put on some flux. *Take a soldering iron with tin at the end. *Pass over the chip to smooth the balls. *Clean. *Put on a reballing stencil. *Spread some soldering paste. *Heat with hot air to form the balls. *Extract the chip by pushing with a thin tweezers. *Check the size of the balls. *And we end up putting the chip back. Flow, position and solder with hot air. *We let the phone cool, we go back and the problem is solved!

Add to Wishlist

1616A0 U2 USB for iphone 13 13 Pro Max 13Mini Charging TryStar

₨ 550 Add to cart

1616A0 U2 USB for iphone 13 13 Pro Max 13Mini Charging TryStarHow to replace iphone iC chips?*Remove the chip cleanly, with hot air. *Clean the tracks with a soldering iron, tin and flux. *Clean the map. *Inspect the card under the microscope. *If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection. *Put on some flux. *Take a soldering iron with tin at the end. *Pass over the chip to smooth the balls. *Clean. *Put on a reballing stencil. *Spread some soldering paste. *Heat with hot air to form the balls. *Extract the chip by pushing with a thin tweezers. *Check the size of the balls. *And we end up putting the chip back. Flow, position and solder with hot air. *We let the phone cool, we go back and the problem is solved!

Add to Wishlist

iPhone11 11PRO 11PROMAX fast charge ic SPTMB1

₨ 1,300 Add to cart

iPhone11 11PRO 11PROMAX fast charge ic SPTMB1How to replace iphone iC chips?*Remove the chip cleanly, with hot air. *Clean the tracks with a soldering iron, tin and flux. *Clean the map. *Inspect the card under the microscope. *If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection. *Put on some flux. *Take a soldering iron with tin at the end. *Pass over the chip to smooth the balls. *Clean. *Put on a reballing stencil. *Spread some soldering paste. *Heat with hot air to form the balls. *Extract the chip by pushing with a thin tweezers. *Check the size of the balls. *And we end up putting the chip back. Flow, position and solder with hot air. *We let the phone cool, we go back and the problem is solved!

Add to Wishlist

343S00121 iPhone Original

₨ 2,200 Add to cart

iPad Pro 9.7/10.5 343S00121 Original Power icHow to replace iphone iC chips?*Remove the chip cleanly, with hot air. *Clean the tracks with a soldering iron, tin and flux. *Clean the map. *Inspect the card under the microscope. *If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection. *Put on some flux. *Take a soldering iron with tin at the end. *Pass over the chip to smooth the balls. *Clean. *Put on a reballing stencil. *Spread some soldering paste. *Heat with hot air to form the balls. *Extract the chip by pushing with a thin tweezers. *Check the size of the balls. *And we end up putting the chip back. Flow, position and solder with hot air. *We let the phone cool, we go back and the problem is solved!

Add to Wishlist

iPhone12 12PRO 12PROMAX 12MINI U2 charge ic 1614A1

₨ 450 Add to cart

iPhone12 12PRO 12PROMAX 12MINI U2 charge ic 1614A1How to replace iphone iC chips?*Remove the chip cleanly, with hot air. *Clean the tracks with a soldering iron, tin and flux. *Clean the map. *Inspect the card under the microscope. *If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection. *Put on some flux. *Take a soldering iron with tin at the end. *Pass over the chip to smooth the balls. *Clean. *Put on a reballing stencil. *Spread some soldering paste. *Heat with hot air to form the balls. *Extract the chip by pushing with a thin tweezers. *Check the size of the balls. *And we end up putting the chip back. Flow, position and solder with hot air. *We let the phone cool, we go back and the problem is solved!

Add to Wishlist

iPhone 6 big power ic 338S1251-AZ

₨ 500 Add to cart

iPhone 6 big power ic 338S1251-AZHow to replace iphone iC chips?*Remove the chip cleanly, with hot air. *Clean the tracks with a soldering iron, tin and flux. *Clean the map. *Inspect the card under the microscope. *If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection. *Put on some flux. *Take a soldering iron with tin at the end. *Pass over the chip to smooth the balls. *Clean. *Put on a reballing stencil. *Spread some soldering paste. *Heat with hot air to form the balls. *Extract the chip by pushing with a thin tweezers. *Check the size of the balls. *And we end up putting the chip back. Flow, position and solder with hot air. *We let the phone cool, we go back and the problem is solved!

Add to Wishlist