No products in the cart.
Showing 1–16 of 24 resultsSorted by latest
![Mechanic UV559 Flux Paste](https://dhics.pk/wp-content/uploads/2024/10/mini_magick20241030-42403-xu6h4v-400x400.jpg)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Mechanic 217*C Solder Paste
Add to Wishlist
Add to Wishlist
![AMAOE U-APU3 Stencil For RAM A10/A11/A12/A13/A14/A15/A16](https://dhics.pk/wp-content/uploads/2024/09/apu3-1-400x400.webp)
Add to Wishlist
Add to Wishlist
AMAOE U-APU3 Stencil For RAM A10/A11/A12/A13/A14/A15/A16
Add to Wishlist
Add to Wishlist
![iPhone X big power ic 338S00341 Refurbish](https://dhics.pk/wp-content/uploads/2024/06/338S00341-B1-400x400.jpg)
Add to Wishlist
Add to Wishlist
iPhone X big power ic 338S00341
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
![SAM17 Amaoe Stencil For Exynos2200, SM8450 CPU, RAM](https://dhics.pk/wp-content/uploads/2023/08/100-1-400x400.jpg)
Add to Wishlist
Add to Wishlist
SAM17 Amaoe Stencil For Exynos2200, SM8450 CPU, RAM
Add to Wishlist
Add to Wishlist
![AMAOE Stencil DDR1 For DDR Chip Integrated Network](https://dhics.pk/wp-content/uploads/2023/06/83-400x400.jpg)
Add to Wishlist
Add to Wishlist
AMAOE Stencil DDR1 For DDR Chip Integrated Network
Add to Wishlist
Add to Wishlist
![AMAOE Stencil LPDDR1 For BGA200/BGA178](https://dhics.pk/wp-content/uploads/2023/06/82-400x400.jpg)
Add to Wishlist
Add to Wishlist
AMAOE Stencil LPDDR1 For BGA200/BGA178
Add to Wishlist
Add to Wishlist
![iPhone XS XR MAX power amplifier IC 76018](https://dhics.pk/wp-content/uploads/2023/06/95-1-400x400.png)
Add to Wishlist
Add to Wishlist
iPhone XS XR MAX power amplifier IC 76018
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
![iPhone XS XR MAX power amplifier IC 2018-15](https://dhics.pk/wp-content/uploads/2023/07/WhatsApp-Image-2023-07-04-at-15.04.36-400x400.jpg)
Add to Wishlist
Add to Wishlist
iPhone XS XR MAX power amplifier IC 2018-15
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
![iPhone XS XR MAX power amplifier IC 203-15](https://dhics.pk/wp-content/uploads/2023/06/93-1-400x400.png)
Add to Wishlist
Add to Wishlist
iPhone XS XR MAX power amplifier IC 203-15
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
![iPhone XS XR MAX power amplifier IC 170-21](https://dhics.pk/wp-content/uploads/2023/06/92-1-400x400.png)
Add to Wishlist
Add to Wishlist
iPhone XS XR MAX power amplifier IC 170-21
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
![iPhone XS XR MAX power amplifier IC 8092MS040](https://dhics.pk/wp-content/uploads/2023/06/91-1-400x400.png)
Add to Wishlist
Add to Wishlist
iPhone XS XR MAX power amplifier IC 8092MS040
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
![iPhone X power amplifier IC 81004](https://dhics.pk/wp-content/uploads/2023/06/90-1-400x400.png)
Add to Wishlist
Add to Wishlist
iPhone X power amplifier IC 81004
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
![XR XS MAX Charger coil L3301 L3302 L3303](https://dhics.pk/wp-content/uploads/2023/06/76-400x400.png)
Add to Wishlist
Add to Wishlist
iphone XR XS MAX Charger coil L3301 L3302 L3303
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
![iPhone X Touch IC BCM15951B0KUB92GT](https://dhics.pk/wp-content/uploads/2023/06/60-400x400.png)
Add to Wishlist
Add to Wishlist
iPhone X Touch IC BCM15951B0KUB92GT
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
![iPhone X U5600 touch power supply IC](https://dhics.pk/wp-content/uploads/2023/06/59-400x400.png)
Add to Wishlist
Add to Wishlist
iPhone X U5600 touch IC
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Filter Products
Archives
- February 2025
- January 2025
- December 2024
- November 2024
- October 2024
- September 2024
- August 2024
- July 2024
- June 2024
- May 2024
- April 2024
- January 2024
- November 2023
- October 2023
- September 2023
- August 2023
- July 2023
- June 2023
- May 2023
- April 2023
- March 2023
- February 2023
- January 2023
- October 2022
- April 2022
- August 2021
- November 2020
- September 2019