No products in the cart.
Showing 1–16 of 21 resultsSorted by latest
Add to Wishlist
Add to Wishlist
X1000 Lead Free Flame Retardant Washing Water PCB Cleaner For Motherboard Clearning Flux,Bga Soldering Cleaning Tools
X1000 Lead-Free Board Washing Water Feature:
1. To quickly clean dust, oil stains, metal dust, etc.Easy to volatilize and leaves no marks.
2. Suitable for PCB Board cleaning after soldering,Cleaning after circuit welding,Cleaning computer main board after soldering, Cleaning after PCBA circuit welding soldering, Cleaning after the surface-mounted process ,Cleaning phone board after soldering,
Cleaning after electronics repairing More applications are waiting for you to discover.
3. Deep decontamination Quick evaporate and leave no stains.Clean a wide area,it can clean rosin, flux, grease,dirt, etc. on the circuit board, etc.Excellent cleaning ability.
4. Compatible with precision electronics repairing.Widely used in phone main board,and chip.
5. Lead-free board washing water.The board washing water is made of lead-free material which has no corrosion effect on the PCB and does not corrode metaland glass fiber.
6. Double leak-proof,fully sealed cover to prevent leakage during transportation.Double sealing shows our sense of responsibility for product protection.
- Metal-can body design,Repair Man lead-free board washing water is packaged in metal cans to make sure the product is safely stored and well protected during transportation.
- Double protection sealed plastic pull ring.
7.Designed for protecting the 'Microphone'.Protection stickers are included in the package.
- Please tape the microphone hole to avoid damage when cleaning the main board.
8.Instructions Of Usage
01. Use with a fur brush or a piece of dust-free cloth Start by using a brush ortools to remove large foreign matter on the surface of the circuit board,and then use a brush orothertools to scrub the main board.
02. ultrasonic immersion cleaning
Ultrasonic clean. Pour board washing water into the ultrasonic cleaner, and then place the PCB or workpiece to be cleaned into the ultrasonic cleaner. turn the device on for4- 6 minutes.
Tips:
If the board turns white, or sticky afterward,stains remain on the board,which results in "Invalid cleaning". Please use the washing water with a piece of
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Lead Free PCB Cleaner Repairman X500 500 ml.
Soldering Flux Clean Liquid, Phone PCB Board Repair, Degreasing Oil, Cleaning Agent, Solder Stain Remover.
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Integrated Spot Welding Machine QianLi Macaron Max
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Features:
. High Quality
. 3 Levels to Choose
. Upgraded Version
. High Concentricity
. Forward/Reverse Glue Removal Design
. Suitable For Various Glue Removal Needs
. Green Light For Dust detection
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
QIANLI JJ-003 Mega-idea Ultra-thin Fixture with Adjustable Clamp Range Board Holder
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
QIANLI MEGA-IDEA UV Light Curing Soldering Mask
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
338S00564 Camera iC For IPhone 12/12Pro/12Promax/12mini
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Mega-idea Repair Blade (10pcs/pack)
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
QianLi IPinch 360 Degree Rotating Turntable Logic Board PCB Holder
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
TPS65656A2 100% Original Display iC For iPhone 12 12ProMax
iPhone 12 No display Problem solution iC TPS65656A2
iPhone 12ProMax No display Problem solution iC TPS65656A2
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
6S touch 343S0694 100% Original Touchscreen Controller iC For iPhone 6/6 plus 6s/6s Plus
iPhone 6 Touch not working Problem solution iC chip, Touch screen controller iC 343S0694
iPhone 6 plus Touch not working Problem solution iC chip, Touch screen controller iC 343S0694
iPhone 6s Touch not working Problem solution iC chip, Touch screen controller iC 343S0694
iPhone 6s Plus Touch not working Problem solution iC chip, Touch screen controller iC 343S0694
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone 12/12PRO/12 Promax/12mini Signal IC QET5100
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone X Signal IC QM18098
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone 12/12PRO/12 Promax/12mini intermediate frequency IC SDR865
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone 12/12PRO/12 Promax/12mini audio IC 338S00537
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone 12/12PRO/12 Promax/12mini baseband power IC PMX55
How to replace iphone iC chips?
*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist