No products in the cart.
Showing all 13 resultsSorted by latest
Add to Wishlist
Add to Wishlist
1612A1 100% Original Charging iC For Apple iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max
Apple iPhone 11 Not charging solution iC chip, Dead solution iC 1612A1
iPhone 11 Pro Not charging solution iC chip, Dead solution iC 1612A1
iPhone 11 Pro Max Not charging solution iC chip, Dead solution iC 1612A1
iPhone 8 Not charging solution iC chip, Dead solution iC 1612A1
iPhone 8 Plus Not charging solution iC chip, Dead solution iC 1612A1
iPhone X Not charging solution iC chip, Dead solution iC 1612A1
iPhone XS Not charging solution iC chip, Dead solution iC 1612A1
iPhone XS Max Not charging solution iC chip, Dead solution iC 1612A1
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone 11/11PRO/11pro MAX Charger IC SN2611A0How to replace iphone iC chips?*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Features:Automatic precise positioning
The new magnetic dynamic original positioning
Strong magnetic force automatic clampingInstallation Method:Prepare the tin planting platform and close the chip with a small triangle, fixed on the clamping position (It shall be consistent with the direction of the steel mesh)
Place the steel mesh directly on the slot of the magnetic suction base to complete the installation (Check whether the mesh is aligned with the bottom chip)Package includes:1 x Tin planting platform set
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Features:Automatic precise positioning
The new magnetic dynamic original positioning
Strong magnetic force automatic clampingInstallation Method:Prepare the tin planting platform and close the chip with a small triangle, fixed on the clamping position (It shall be consistent with the direction of the steel mesh)
Place the steel mesh directly on the slot of the magnetic suction base to complete the installation (Check whether the mesh is aligned with the bottom chip)Package includes:1 x Tin planting platform set1
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone 11/11PRO/11 Pro Max small audio IC 338S00509How to replace iphone iC chips?*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone 11/11PRO/11 Pro Max coilHow to replace iphone iC chips?*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone 11/11PRO/11pro MAX Charger IC SN2611A0How to replace iphone iC chips?*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone 11/11PRO/11pro MAX wifi IC 339S00647How to replace iphone iC chips?*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone 11/11PRO/11 Promax audio IC big 338S00509How to replace iphone iC chips?*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone 11/11PRO/11pro MAX baseband power ic PMB6840How to replace iphone iC chips?*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone 11/11PRO/11pro MAX big power ic 343S00354How to replace iphone iC chips?*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
iPhone11 11PRO 11PROMAX fast charge ic SPTMB1How to replace iphone iC chips?*Remove the chip cleanly, with hot air.
*Clean the tracks with a soldering iron, tin and flux.
*Clean the map.
*Inspect the card under the microscope.
*If we compare to the diagram on the PhoneBoard software;We observe very clearly that we will be able to put a wire to redo this connection.
*Put on some flux.
*Take a soldering iron with tin at the end.
*Pass over the chip to smooth the balls.
*Clean.
*Put on a reballing stencil.
*Spread some soldering paste.
*Heat with hot air to form the balls.
*Extract the chip by pushing with a thin tweezers.
*Check the size of the balls.
*And we end up putting the chip back. Flow, position and solder with hot air.
*We let the phone cool, we go back and the problem is solved!
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
1612A1 100% Original Charging iC For Apple iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max
Apple iPhone 11 Not charging solution iC chip, Dead solution iC 1612A1
iPhone 11 Pro Not charging solution iC chip, Dead solution iC 1612A1
iPhone 11 Pro Max Not charging solution iC chip, Dead solution iC 1612A1
iPhone 8 Not charging solution iC chip, Dead solution iC 1612A1
iPhone 8 Plus Not charging solution iC chip, Dead solution iC 1612A1
iPhone X Not charging solution iC chip, Dead solution iC 1612A1
iPhone XS Not charging solution iC chip, Dead solution iC 1612A1
iPhone XS Max Not charging solution iC chip, Dead solution iC 1612A1
Add to Wishlist
Add to Wishlist