HI6523 GWCV200 Original new Power iC for HUAWEI

HI6523 GWCV200 Original new Power iC for HUAWEI MT7-TL10, HUAWEI MATE 8 (NXT-L29), HUAWEI HONOR 6 (H60-L04), HUAWEI P6-U06, HUAWEI HONOR V8, HUAWEI HONOR 8, HUAWEI HONOR 7, HUAWEI HONOR 6 PLUS, HUAWEI P8, HUAWEI MATE S, HUAWEI HONOR MAGIC 2, HUAWEI MATE 20, HUAWEI MATE 10, HUAWEI MATE 20 PRO, HUAWEI NOVA 3, HUAWEI MATE 10 PRO, HUAWEI MATE 9, MT7-L09

HUAWEI P6-U06 Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI HONOR V8 Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI HONOR 8 Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI HONOR 7 Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI HONOR 6 PLUS Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI P8 Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI MATE S Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI HONOR MAGIC 2 Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI MATE 20 Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI MATE 10 Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI MATE 20 PRO Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI NOVA 3 Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI MATE 10 PRO Not charging solution iC chip, Dead solution iC HI6523 GWCV200
HUAWEI MATE 9 Not charging solution iC chip, Dead solution iC HI6523 GWCV200

Replace or repairing procedure of HI6523 GWCV200 Power iC
Here is a full procedure to replace or repair in easy and best way.

1. Diagnose carefully that your faulty mobile actually in iC fault.

2. And there is no other solution, only replacement of iC chip is a solution.

3. Cover the whole mother board with high intensity heat insulation tape. Grip the board in board catcher normal tight.

4. Apply good quality flux paste on iC chip you want to remove.

5. Apply heat with heat gun or heat station. Do not exceed the heat above 350 degree centigrade.

6. Remove the iC chip when it starting move or slip from its original place.

7. Clean the mother board iC pad with soldering wiCk and with soldering flux.

8. Apply little flux on mother board iC pad.

9. Put original iC bought from DHiCs.PK

10. Apply heat 300 to 350 degree centigrade according to your heat station brand.

11. Heating time one minute to one minute 30 second.

12. After the iC chip is pasted, net cool the mother board about 3 to 5 minutes.

13. Now everything is done. You can fix the mother board and turn on mobile.